TM 5-2350-377-13&P
0041
INSTALLATION (LEFT SIDE) - Continued
5.
Install left bracket (Figure 5, Item 10) on manifold (Figure 5, Item 24) with two washers (Figure 5, Item 12) and
new machine bolts (Figure 5, Item 11).
6.
Install right side of bracket (Figure 5, Item 19) on manifold (Figure 5, Item 24) with two washers
(Figure 5, Item 9) and new machine bolts (Figure 5, Item 8).
7.
Install manifold (Figure 5, Item 24) on hull (Figure 5, Item 18) with two washers (Figure 5, Item 9) and new
machine bolts (Figure 5, Item 11). Do not tighten machine bolts.
8.
Connect five tubes (Figure 5, Item 14) to four adapters (Figure 5, Item 15) and elbow (Figure 5, Item 13) at
front of manifold (Figure 5, Item 24).
9.
Connect five tubes (Figure 5, Item 17) to five adapters (Figure 5, Item 16) at bottom of manifold
(Figure 5, Item 24).
10.
Connect four tubes (Figure 5, Item 22) to tee (Figure 5, Item 23) and fitting (Figure 5, Item 21).
11.
Connect hose (Figure 5, Item 20) to adapter (Figure 5, Item 25) at rear of manifold (Figure 5, Item 24).
12.
Install tee (Figure 5, Item 1) and tee (Figure 5, Item 6) on adapters (Figure 5, Item 7).
13.
Install reducer (Figure 5, Item 5) on tee (Figure 5, Item 6).
14.
Connect two valve bank hoses (Figure 5, Item 2) on top of tee (Figure 5, Item 1) and tee (Figure 5, Item 6).
15.
Connect elbow (Figure 5, Item 4) to reducer (Figure 5, Item 5).
16.
Connect track and blade track adjuster hose (Figure 5, Item 3) to elbow (Figure 5, Item 4).
17.
Connect track and blade track adjuster hose (Figure 5, Item 3) to tee (Figure 5, Item 1).
18.
Connect five remaining hoses (Figure 5, Item 2) to remaining adapters (Figure 5, Item 7) on top of manifold
(Figure 5, Item 24).
0041-6
03/15/2011Rel(1.8)root(maintwp)wpno(M00013)
