TM 5-2350-377-13&P
0041
REMOVAL (LEFT SIDE) - Continued
9.
From hull (Figure 3, Item 17) access opening, disconnect five tubes (Figure 3, Item 16) from five adapters
(Figure 3, Item 15) at bottom of manifold.
10.
Remove three machine bolts (Figure 3, Item 19), washers (Figure 3, Item 18), and bracket
(Figure 3, Item 20) from manifold (Figure 3, Item 3) and hull (Figure 3, Item 17). Discard machine bolts.
11.
Remove machine bolt (Figure 3, Item 6) and washer (Figure 3, Item 7) from bracket (Figure 3, Item 10) and
hull (Figure 3, Item 17). Discard machine bolt.
12.
Remove two machine bolts (Figure 3, Item 8), washers (Figure 3, Item 9), and bracket (Figure 3, Item 10) from
manifold. Discard machine bolts.
13.
Remove seven adapters (Figure 3, Item 5) and O-rings (Figure 3, Item 4) from top of manifold
(Figure 3, Item13). Discard O-rings.
14.
Remove four adapters (Figure 3, Item 13), elbow (Figure 3, Item 12), and five O-rings (Figure 3, Item 11) from
front of manifold (Figure 3, Item 3). Discard O-rings.
15.
Remove five adapters (Figure 3, Item 15) and O-rings (Figure 3, Item 14) from bottom of manifold
(Figure 3, Item 3). Discard O-rings.
16.
Remove tee (Figure 3, Item 21), two adapters (Figure 3, Item 22), fitting (Figure 3, Item 1), and
three O-rings (Figure 3, Item 2) from rear of manifold (Figure 3, Item 3). Discard O-rings.
REAR
3
VIEW
6
2
1
5
7
4
3
8
2
2
22
9
22
10
11
21
18
12
19
13
14
16
14
FRONT
15
VIEW
20
19
18
17
15
M0060HBF
Figure 3.
Manifold Tubes Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00013)
