TM 5-2350-377-13&P
0049
TYPICAL PLUG
DISASSEMBLY
1.
Remove nut from shell assembly and slide back on cable (Figure 2).
2.
Slide grommet back on cable (Figure 2).
3.
Push contacts out through rear of insert with pin extractor (Figure 2).
4.
Push insert through rear of shell (Figure 2).
5.
Unsolder cable from contacts (Figure 2).
6.
Remove coupling nut, grommet, and nut from cable (Figure 2).
ASSEMBLY
1.
Slide nut over cable (Figure 2).
2.
Slide grommet over cable leads (Figure 2).
3.
Strip cable insulation equal to depth of solder wells of contacts (Figure 2).
4.
Insert cable into solder wells of contacts and solder (Figure 2).
5.
Push insert into shell from rear until seated. Groove in insert must be aligned with guide in shell to ensure
proper fit (Figure 2).
6.
Push contacts into insert from rear until seated (Figure 2).
7.
Slide coupling nut onto shell assembly (Figure 2).
8.
Push grommet down cable and over solder wells of contacts (Figure 2).
9.
Install nut on shell assembly (Figure 2).
CABLE
GROMMET
CONTACTS
GROOVE
(PIN OR SOCKET)
COUPLING
INSERT
NUT
SHELL
NUT
M0118HBF
Figure 2. Plug Repair.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00032)
