TM 5-2350-377-13&P
FIELD MAINTENANCE
BLOCKING/UNBLOCKING THE HULL
INITIAL SETUP:
Tools and Special Tools
References
TM 5-2350-262-10
Stand, Vehicle (WP 0071, Table 1, Item 6)
Personnel Required
Construction Equipment Repairer, 91L (Two)
BLOCKING/UNBLOCKING THE HULL
To block vehicle, start the engine (TM 5-2350-262-10) and place the SPRUNG/UNSPRUNG control lever
(Figure 1, Item 2) in UNSPRUNG. Position both suspension control levers (Figure 1, Item 1) to lower front end fully.
When rear of vehicle reaches its highest position, have assistant place support stands (Figure 1, Item 3) under both
front corners of hull. Before shutting off engine (TM 5-2350-262-10), position ejector about midway in bowl. Reverse
procedure to unblock hull.
2
1
3
3
M0115HBF
Figure 1. Blocking/Unblocking the Hull.
END OF TASK
END OF WORK PACKAGE
0047-1/2 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00029)
