TM 5-3800-205-10-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0012 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
1. Select STOP LIGHT or SER.
11. Stoplights Do Not Operate When Brake
1. Ensure STOP LIGHT or SER.
DRIVE. If problem still exists,
Pedal is Pressed.
DRIVE function has been
go to test step 2.
selected on military light
switch.
2. Check lights for separated
2. Reconnect connectors, if
connections/damage.
required. If any damage to
lights is found, notify Unit
Maintenance. If problem still
exists, go to test step 3.
NOTE
A thirty (30) minute cool down time may be required before circuit breaker automatically resets.
3. Check that circuit breaker is
3. If circuit breaker does not
not tripped.
automatically reset, notify
Unit Maintenance.
1. Select STOP LIGHT or SER.
12. Taillights Do Not Come On.
1. Ensure STOP LIGHT or SER.
DRIVE. If problem still exists,
DRIVE function has been
go to test step 2.
selected on military light
switch.
2. Check electrical connections
2. Reconnect connectors, if
at hitch area.
required. If problem still
exists, go to test step 3.
NOTE
A thirty (30) minute cool down time may be required before circuit breaker automatically resets.
3. Check that circuit breaker is
3. If circuit breaker does not
not tripped.
automatically reset, notify
Unit Maintenance.
13. Windshield Washer Not Working.
1. Check fluid reservoir.
1. If reservoir is empty, fill
problem still exists, go to test
step 2.
2. Check for blown fuse at fuse/
2. If fuse is bad, request a
circuit breaker panel in cab.
replacement fuse from Unit
Maintenance. If fuse is good
and problem still exists, go to
test step 3.