TM 5-3800-205-10-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0012 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
10. Excessive Exhaust Smoke (White)
1. Check and monitor engine
1. Allow engine to warm up to
During Startup.
operating temperature.
operating temperature. If
problem still exists, go to test
step 2.
2. Operate air intake heater (WP
2. If problem still exists, notify
Unit Maintenance.
11. Low or No Engine Oil Pressure Alert
Indicator, Action Light, and Action
Alarm are On.
CAUTION
When action alarm sounds, immediate shutdown of machine is required to prevent damage to
machine.
Check engine oil level.
If engine oil is low, fill to correct
still
exists,
notify
Unit
Maintenance.
SCRAPER SYSTEM
1.
Bowl Control Lever Binds.
1. Check for bent or damaged
1. If lever is bent or damaged,
lever.
notify Unit Maintenance. If
lever is okay, go to test step 2.
2. Clean debris from control
2. Check bowl/ejector main
valve linkage. If problem still
control valve, located inboard
exists, go to test step 3.
of right tractor fender, for
buildup of debris.
3. Clean any debris from lever. If
3. Check control lever for
any damage is found, notify
damage or debris that would
Unit Maintenance.
restrict freedom of movement,
and/or automatic return to hold
position.
2.
Ejector Control Lever Binds.
1. Check for bent or damaged
1. If lever is bent or damaged,
lever.
notify Unit Maintenance. If
lever is okay, go to test step 2.
2. Clean debris from control
2. Check bowl/ejector main
valve linkage. If problem still
control valve, located inboard
exists, go to test step 3.
of right tractor fender, for
buildup of debris.