TM 5-3800-205-10-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0012 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSMISSION - CONTINUED
4.
Transmission Does Not Operate in Any
Speed.
NOTE
Before checking oil level, ensure that machine is parked on level ground, parking brake applied,
transmission in N (Neutral) and locked, oil warm, engine at low idle, ejector moved fully forward,
and scraper bowl lowered with slight downward pressure applied.
Check transmission oil level.
If transmission oil is low, fill to
problem still exists, notify Unit
Maintenance.
5.
Transmission Does Not Shift From One
1. Check position of shift lever
1. Unlock lever if required. If
Direction to Another.
rack.
problem still exists, go to test
step 2.
2. Check transmission oil level.
2. If transmission oil is low, fill to
problem still exists, go to test
step 3.
3. Control linkage
out
of
3. Notify Unit Maintenance.
adjustment.
6.
Transmission Does Not Shift From One
1. Check transmission oil level.
1. If transmission oil is low, fill to
Speed to Another.
problem still exists, go to test
step 2.
2. Control linkage
out
of
2. Notify Unit Maintenance.
adjustment.
7.
Transmission Engages, But Machine
There may be mechanical failure.
Notify Unit Maintenance.
Does Not Move. Engine Stops Running.
8.
Transmission Shifting is Rough.
Control linkage may be out of
Notify Unit Maintenance.
adjustment.