TM 5-3800-205-23-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0007 00
Table 1. Air System and Brakes Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Service Brakes Do Not Release Correctly.
1. Check for mud or dirt under
a. Clean mud or dirt from under
brake pedal.
brake pedal.
b. If problem still exists, go to
test step 2.
2. Perform Air Leakage Checks
a. Repair any leaks found
during Air Leakage Checks.
b. If problem still exists, go to
test step 3.
NOTE
Be sure to check service brake linings at rear of machine (TM 5-3800-205-23-2 or TM 5-3800-205-23-3).
a. Replace service brake linings
3. Check service brake linings
for wear or damage in
accordance with PMCS
annual check (WP 0010 00).
b. If problem still exists, go to
test step 4.
4. Check brake control valve for
Replace brake control valve
damage.
NOTE
Be sure to check brake calipers at rear of machine (TM 5-3800-205-23-2 or TM 3800-205-23-3).
5. Check brake caliper(s) for
a. Replace brake
caliper(s)
damage.
b. If problem still exists, go to
test step 6.
6. Check double check valves
Replace double check valves
for damage.
