TM 5-3800-205-23-1
FINAL DRIVE MAINTENANCE - CONTINUED
0077 00
DISASSEMBLY - CONTINUED
2.
Remove and discard O-ring (9) from planetary carrier
(11).
8
3.
Remove shaft (8) and gear (10) from planetary carrier
(11).
390-538
11
9
10
4.
Remove four thrust washers (12 and 13) and two roller
12
13
10
bearings (14) from gear (10).
5.
Repeat steps 1 through 4 for other two gears (10).
390-539
13
14
12
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic material.
However, it may be irritating to the eyes and skin. The use of protective gloves and goggles is sug-
gested. Use in well-ventilated areas. Keep away from open flames and other sources of ignition. Failure
to do so may result in injury or death to personnel.
1.
Clean all removed components with cleaning compound and dry thoroughly.
2.
Inspect all parts. Replace worn or damaged parts.
ASSEMBLY
1.
Install two roller bearings (14) and four thrust washers (13 and 12) on gear (10).
2.
Install gear (10) in planetary carrier (11) with shaft (8).
3.
Install new O-ring (9) on planetary carrier (11).
4.
Install retaining ring (7) on shaft (8).
5.
Repeat steps 1 through 4 for other gears (10).
0077 00-3
