TM 5-3800-205-23-1
FRONT AXLE SHAFTS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Personnel Required
Maintenance Level
Two
Unit
Equipment Condition
Tools and Special Tools
Machine parked on hard, level surface (TM 5-3800-
Tool kit, general mechanic's (Item 33, WP 0172
205-10-1 or TM 5-3800-205-10-2)
Scraper bowl or water tank lowered to ground (TM
Shop equipment, common no. 1 (Item 24, WP
5-3800-205-10-1 or TM 5-3800-205-10-2)
Parking brake applied (TM 5-3800-205-10-1 or TM
Materials/Parts
5-3800-205-10-2)
Cleaning compound, solvent (Item 6, WP 0171
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Oil, lubricating (Item 21, 22, or 23, WP 0171 00)
Battery disconnect switch in OFF position (TM 5-
Rag, wiping (Item 31, WP 0171 00)
3800-205-10-1 or TM 5-3800-205-10-2)
Final drive drained (WP 0010 00)
O-ring
REMOVAL
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
1.
Remove six bolts (2), washers (3), and cover (4) from
2,3
1
final drive (1).
4
