TM 5-3800-205-23-1
SKID STEER CONTROL AND AIR LINES REPLACEMENT - CONTINUED
0085 00
REMOVAL - CONTINUED
3.
Open engine access door. Remove six screws (6) and washers from access panel cover (8) at left rear of engine compart-
ment. Remove electrical harness clip (7). Remove access panel.
6
7
390-1379
8
NOTE
Two screws holding skid steer control unit are only accessible through access panel at left rear of engine
compartment.
4.
Remove two screws (10) and washers, and remove skid steer control unit (9).
5.
Use a heater gun to remove air lines (11) from skid steer control unit (9).
9
10
11
0085 00-3
