TM 5-3800-205-23-1
SKID STEER CONTROL AND AIR LINES REPLACEMENT - CONTINUED
0085 00
INSTALLATION - CONTINUED
NOTE
Two screws holding skid steer control unit are only accessible through access panel at left rear of engine
compartment.
2.
Use a heater gun to install air lines (11) into skid steer control unit (9).
3.
Install two screws (10) and washers and tighten.
9
10
11
4.
Install access panel cover (8) and electrical harness clip (7) with six screws (6) and washers. Tighten screws.
6
7
390-1379
8
0085 00-5
