TM 5-3800-205-23-1
PARKING BRAKE OR EMERGENCY BRAKE CONTROL VALVE REPLACEMENT - CONTINUED
0089 00
REMOVAL
1.
Remove spring pins (1) from neutral lock, parking brake, and emergency brake handles (2,3, and 4). Discard spring
pins.
2.
Remove lock handle (2).
3.
Remove handles (3 and 4) from two valves (5).
4.
Remove nuts (6) from valves (5).
5.
Inspect seal inside nuts (6) for cracks or damage. If seals are cracked or damaged, replace nut(s).
NOTE
Panel does not have to be completely removed to access control valves. Slide panel up transmission shift
lever and turn panel to left.
6.
Remove four screws (7) and washers (8) from panel (9).
1
2
3
4
1
5
6
SEAL
6
1
7,8
6
9
7.
Disconnect pressure switch connector (10) from har-
5
10
11
ness connector (11).
8.
Remove switch (12) from valve (5).
9.
Tag and disconnect two hoses (13) from valve (5) and
remove valve.
10.
Remove adapters, tees and elbows from old valve (5).
Remove antiseizing tape from threads of adapters, tees
and elbows.
12
13
0089 00-2