TM 5-3800-205-23-1
PARKING BRAKE ACTUATOR REPLACEMENT - CONTINUED
0088 00
REMOVAL - CONTINUED
2.
Remove cotter pin (4) and clevis pin (5) from yoke rod end (6). Discard cotter pin.
3.
Drain air tanks (TM 5-3800-205-10 or TM 5-3800-205-10-2).
WARNING
Do NOT disconnect any air lines or fittings unless engine is shut down and air system pressure is
relieved. Failure to follow this warning could result in serious injury to personnel.
Always wear eye protection when disconnecting air lines. Residual air will be expelled. Failure to fol-
low this warning may result in serious eye injury.
4.
Loosen nut (3) and disconnect hose (2) from parking brake actuator (1).
3
1
2
4
390-024
5
6
5.
Remove two nuts (7), washers (8), and parking brake
7,8
1
actuator (1) bracket (12).
6.
If damaged, remove two bolts (10), washers (11), and
bracket (12) from transfer case (9).
390-025
12 10,11
9
0088 00-2
