TM 5-3800-205-23-1
BRAKE CALIPER REPLACEMENT - CONTINUED
0087 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
3
Brake caliper weighs 106 lb (48 kg).
2.
Remove two bolts from brake caliper (3) and install
two links.
3.
Attach nylon sling to links and to suitable lifting
device.
4.
With assistance, remove eight bolts (4), washers (5),
and brake caliper (3) from machine.
5.
If replacing brake caliper (3), remove links from cali-
per.
4,5
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Brake caliper weighs 106 lb (48 kg).
0087 00-2
