TM 5-3800-205-23-1
REARVIEW AND SIDE MIRRORS REPLACEMENT
THIS WORK PACKAGE COVERS
Rearview Mirror: Removal, Installation
Side Mirror: Removal, Installation
INITIAL SETUP
Maintenance Level
Equipment Condition - Continued
Unit
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Parking brake applied (TM 5-3800-205-10-1 or TM
Tool kit, general mechanic's (Item 33, WP 0172
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Equipment Condition
Battery disconnect switch in OFF position (TM 5-
Machine parked on hard, level surface (TM 5-3800-
3800-205-10-1 or TM 5-3800-205-10-2)
205-10-1 or TM 5-3800-205-10-2)
REARVIEW MIRROR REMOVAL
1.
Remove two knobs (1), washers (2), and rearview mir-
6
3
4,5
7
ror (7) from two mirror brackets (3).
2.
Remove two screws (8), washers (9), and wiper motor
cover (6) from two mirror brackets (3).
1,2
3.
Remove two screws (4), washers (5), and mirror
brackets (3) from machine.
8,9
REARVIEW MIRROR INSTALLATION
1.
Install two mirror brackets (3) on machine with two washers (5) and screws (4).
2.
Install wiper motor cover (6) on two mirror brackets (3) with two washers (9) and screws (8).
3.
Install mirror (7) on two mirror brackets (3) with two washers (2) and knobs (1).
4.
Adjust position of rearview mirror (7) for maximum visibility to rear of machine and tighten two knobs (1).