TM 5-3800-205-23-1
DATA PLATE AND DECAL REPLACEMENT
THIS WORK PACKAGE COVERS
Data Plate (Solid Rivet) Replacement
Data Plate (Blind Rivet) Replacement
Decal Replacement
INITIAL SETUP
Equipment Condition
Maintenance Level
Unit
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172 00)
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Shop equipment, common no. 1 (Item 24, WP 0172
Parking brake applied (TM 5-3800-205-10-1 or TM
Heater, gun type, electric (Item 14, WP 0172 00)
5-3800-205-10-2)
Materials/Parts
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Detergent, general purpose (Item 11, WP 0171 00)
Rivet, solid (as required)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Rivet, blind (as required)
DATA PLATE (SOLID RIVET) REPLACEMENT
1.
Using center punch and hammer, mark center of each rivet (1).
2.
Using electric drill and twist drill slightly larger than body diameter of rivet (1), drill into each rivet head until rivet head
can be separated from rivet body.
3.
Remove data plate (2) from tractor.
2
1
CAUTION
DO NOT drill any deeper than necessary
to remove rivet body. Failure to follow this
caution will result in damage to tractor.
4.
Using twist drill the same diameter as rivet (1) body,
remove rivet body from tractor. Discard rivets.
5.
Install data plate (2) on tractor with new rivets (1).
