TM 5-3800-205-23-1
WINDSHIELD WIPER ARM AND MOTOR REPLACEMENT
THIS WORK PACKAGE COVERS
Windshield Wiper Arm: Removal, Installation
Windshield Wiper Motor: Removal, Installation
INITIAL SETUP
Equipment Condition - Continued
Maintenance Level
Scraper bowl or water tank lowered to ground (TM
Unit
5-3800-205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Parking brake applied (TM 5-3800-205-10-1 or TM
Tool kit, general mechanic's (Item 33, WP 0172
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Materials/Parts
Battery disconnect switch in OFF position (TM 5-
Strap, tiedown (Item 38, WP 0171 00)
3800-205-10-1 or TM 5-3800-205-10-2)
Equipment Condition
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
WINDSHIELD WIPER ARM REMOVAL
NOTE
Note position of wiper arm on windshield to aid in installation.
1.
Pull open two covers (5) and remove two nuts (1),
3
4
1,2
1,2
washers (2), and wiper arm (4) from drive and pivot
shaft.
2.
Remove two plastic caps (3).
WINDSHIELD WIPER ARM INSTALLATION
1.
Install two plastic caps (3).
2.
Install wiper arm (4) on drive and pivot shaft with two
washers (2) and nuts (1).
5
3.
Close two covers (5).
390-1060
