TM 5-3800-205-23-1
WINDSHIELD WIPER ARM AND MOTOR REPLACEMENT- CONTINUED
0110 00
WINDSHIELD WIPER MOTOR REMOVAL - CONTINUED
6.
Remove two lower screws (18) and washers (19) at
each end of cover (20). Separate cover from mirror
20
18,19
17
brackets (17).
7.
Remove wiper motor (22) and shim (21) from inside
cab.
21
22
390-1052
WINDSHIELD WIPER MOTOR INSTALLATION
1.
Position shim (21) and wiper motor (22) inside cab and install cover (20) to mirror brackets (17) with two lower washers
(19) and screws (18).
2.
Connect ground wire connector (16) to wiring harness connector (15).
3.
Connect wiper motor connector (14) to wiring harness connector (12). Install clip (13).
NOTE
Windshield wiper motor will be secured to inside of cab as spacer, washer, and nut are installed.
4.
From outside of cab, install pivot plate (8), and spacer (9) with washer (11) and nut (10).
0110 00-3
