TM 5-3800-205-23-1
WINDSHIELD WIPER ARM AND MOTOR REPLACEMENT- CONTINUED
0110 00
WINDSHIELD WIPER MOTOR REMOVAL
1.
Remove wiper arm (Refer to Windshield Wiper Arm Removal).
NOTE
Wiper motor will become loose from inside cab as nut, washer and spacer are removed.
2.
Remove screw (6) and washer (7) from pivot plate (8).
3.
Remove nut (10), washer (11), spacer (9), and pivot
6,7
8
9
10,11
plate (8).
NOTE
Cut and discard tiedown straps as necessary.
4.
From inside of cab, remove clip (13) and disconnect
13
12
14
wiper motor connector (14) from wiring harness con-
nector (12).
5.
Disconnect ground wire connector (16) from wiring
harness connector (15).
390-1053
16 15
0110 00-2