TM 5-3800-205-23-1
WINDSHIELD WASHER RESERVOIR AND PUMP REPLACEMENT- CONTINUED
0109 00
REMOVAL - CONTINUED
6,7
8,9
3.
Disconnect electrical connector (10) from pump (14).
4.
Remove hose (6) from inlet port (7).
5.
Remove hose (8) from outlet port (9).
6.
Remove screw (11) and washer (12) from clamp (13).
7.
Remove pump (14) from clamp (13).
14
8.
Inspect clamp (13) for damage. Replace clamp if dam-
13
aged.
11,12
10
INSTALLATION
1.
Install pump (14) in clamp (13) with washer (12) and screw (11).
2.
Install hose (8) on outlet port (9).
3.
Install hose (6) on inlet port (7).
4.
Connect electrical connector (10) to pump (14).
5.
Install reservoir (2) on engine hood with bracket (3), two washers (5), and bolts (4).
6.
Connect two hoses (1) to bottom of reservoir (2).
1
2
3
4,5
7.
Fill reservoir (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
8.
Close engine access door (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
END OF WORK PACKAGE
0109 00-2
