TM 5-3800-205-23-1
HYDRAULIC LINES AND FITTINGS REPLACEMENT - CONTINUED
0116 00
REMOVAL - CONTINUED
2.
Remove six bolts (5), washers (6), clamp (7), and
retaining strap (2) from hitch.
1
2
3.
Disconnect tube assembly (1) from hose assembly (3).
4.
Remove O-ring (4) from hose assembly (3). Discard
O-ring.
7
5,6
3,4
5.
Remove seven bolts (9), washers (11), clamps (8) and
8
9,10
retaining strap (11) from hitch.
11
6.
Disconnect hose assembly (12) from tube assembly
(1) and remove tube assembly from hitch.
7.
Remove O-ring (13) from hose assembly (12). Discard
1
O-ring.
12,13
INSTALLATION
NOTE
Apply a thin coat of oil to new O-rings prior to installation.
1.
Install new O-ring (13) to end of hose assembly (12).
2.
Position tube assembly (1) on hitch and connect hose assembly (12) to tube assembly.
3.
Install retaining strap (11) and clamps (8) on hitch with seven washers (10) and bolts (9).
4.
Install new O-ring (4) to end of hose assembly (3).
5.
Connect hose assembly (3) to tube assembly (1).
6.
Install retaining strap (2) and clamp (7) on hitch with six washers (6) and bolts (5).
7.
Fill hydraulic tank (WP 0009 00 and WP 0010 00).
8.
Bleed air from circuit by moving cylinders through complete travel at least three times.
END OF WORK PACKAGE
0116 00-2
