TM 5-3800-205-23-1
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0130 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
NOTE
Flywheel housing weighs 70 lb (32 kg).
3.
Fasten two links (1) and hoist to flywheel housing (2).
1
4.
Install flywheel housing (2) on cylinder block with ten
2
bolts (3) and two bolts (4).
5.
Tighten bolts (3) to 118 lb-ft (160 Nm). Tighten bolts
(4) to 40 lb-ft (55 Nm).
4
3
6.
Install flywheel (WP 0131 00).
END OF WORK PACKAGE
0130 00-4
