TM 5-3800-205-23-1
FLYWHEEL MAINTENANCE - CONTINUED
0131 00
REMOVAL
1.
Install link and suitable lifting device on flywheel (5).
2.
Remove top bolt (1) and washer (2) from flywheel (5) and install guide bolt that is longer than top bolt.
3.
Remove seven remaining bolts (3) and washers (4) from flywheel (5).
NOTE
Note position of flywheel to aid in installation.
4.
Remove flywheel (5) from guide bolt and crankshaft.
1,2
3,4
5
5.
Inspect flywheel ring gear. If flywheel ring gear is
damaged, replace flywheel assembly.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Flywheel weighs 75 lb (34 kg).
NOTE
When tightening and torquing bolts, start with top bolt and tighten/torque every other bolt until all eight
bolts are tightened and torqued.
0131 00-2