TM 5-3800-205-23-1
ROCKER SHAFT GROUP REPLACEMENT - CONTINUED
0133 00
REMOVAL - CONTINUED
1
3.
Remove rocker shaft assembly (1) from cylinder head
(5).
5
4.
Repeat steps 2 and 3 for each rocker shaft assembly
(1).
NOTE
6
Tag pushrods to aid in installation. Push-
rods must be installed in same position.
5.
Remove pushrods (6).
INSTALLATION
1.
Install pushrods (6) in cylinder head (5), in same posi-
2
1
tion as removed. Base of pushrod should be in seat of
pushrod lifter.
2.
Position each rocker shaft assembly (1) in cylinder
head (5). Line up pushrods with rocker arms.
3.
Install four bolts (2) in rocker shaft assembly (1).
Tighten bolts to 24 lb-ft (33 Nm).
4.
Tighten all nuts (3).
5.
Adjust valve lash.
5
3
0133 00-2
