TM 5-3800-205-23-1
ENGINE OIL FILTER BASE AND OIL COOLER MAINTENANCE - CONTINUED
0134 00
OIL FILTER BASE AND OIL COOLER REMOVAL - CONTINUED
3.
Remove gasket (10) and discard.
4.
Remove oil cooler (11) and gasket (12) from engine. Discard gasket.
5.
Remove two O-rings (13) from engine. Discard O-rings.
6.
Remove bypass valves from oil filter base (3) (refer to Oil Filter Base Bypass Valve Removal).
7.
Remove elbow (9) and O-ring (8) from oil filter base (3). Discard O-ring.
12
11
10
9
8
6 7
13
7
3
OIL FILTER BASE AND OIL COOLER INSTALLATION
NOTE
Coat new O-rings with clean oil before installation.
1.
Install new O-ring (8) and elbow (9) to oil filter base (3).
2.
Install bypass valves to oil filter base (3) (refer to Oil Filter Base Bypass Valves Installation).
3.
Install two new O-rings (13) to engine.
4.
Position new gasket (12), oil cooler (11), new gasket (10), and oil filter base (3) to engine.
5.
Secure oil filter base (3) and oil cooler (11) to engine with 14 washers (7) and bolts (6).
6.
Install new O-ring and turbocharger oil supply tube assembly to elbow (8).
7.
If removed, install oil filter (WP 0013 00).
8.
Fill engine crankcase (WP 0009 00 and WP 0010 00).
9.
Install turbocharger (WP 0143 00).
10.
Install air inlet heater and aftercooler (WP 0013 00).
11.
Install muffler and exhaust extension (WP 0025 00).
END OF WORK PACKAGE
0134 00-3
