TM 5-3800-205-23-1
ENGINE OIL PUMP ASSEMBLY MAINTENANCE - CONTINUED
0135 00
ASSEMBLY
NOTE
Lubricate all internal parts of pump and new O-rings with clean oil prior to assembly.
1.
Install new bearing sleeve (17) in idler gear (15).
2.
Install shaft (16), washer (14), and screw (13) through idler gear (15) and tighten to pump body. Tighten screw to 52 lb-
ft (70 Nm).
15
17
16
14
13
3.
Install new gasket (11) and outlet elbow (4) on pump with screw (12).
4.
Install new preformed packing (10) and oil pickup tube (7) on pump with two washers (9) and screws (8).
0135 00-3
