TM 5-3800-205-23-1
EXHAUST MANIFOLD REPLACEMENT - CONTINUED
0136 00
INSTALLATION
1.
If removed, apply antiseize compound to threads of mounting studs (4) and install mounting studs on exhaust manifold
(2). Tighten mounting studs to 26 lb-ft (35 Nm).
2.
Apply a thin coat of high-temperature manifold sealer to male ends of exhaust manifolds (2, 3, and 8).
3.
Apply a coat of clean engine oil to inside of female ends of exhaust manifolds (2, 3, and 8).
4.
Assemble exhaust manifolds (2, 3, and 8) and remove excess sealant from joints.
5.
Apply antiseize compound to threads of 12 bolts (6). Position three new gaskets (1) and exhaust manifolds (2, 3, and 8)
on cylinder head assembly. Install five locks (7), retainer (5), and bolts.
6.
Tighten 12 bolts (1) to 33 lb-ft (45 Nm) in sequence
shown.
7.
Bend the locking tabs of locks and retainer over each
bolt head to lock bolts (1) in position.
8.
Install turbocharger (WP 0143 00).
9.
Install air inlet heater and aftercooler (WP 0142 00).
END OF WORK PACKAGE
0136 00-3
