TM 5-3800-205-23-1
FUEL INJECTOR CONTROL LINKAGE REPLACEMENT - CONTINUED
0138 00
REMOVAL - CONTINUED
2.
Remove governor connection tube (2) from cylinder
head.
3.
Remove O-ring from governor connection tube and O-
ring from cylinder head. Discard O-rings.
2
NOTE
Clevis pin must stay with governor in order to be adjusted.
4.
Remove clip and clevis pin (3). Clevis pin connects governor to control lever (4) of fuel injector control linkage (6).
5.
Remove socket head capscrews (5) and fuel injector control linkage (6). Control lever (4) connects fuel injector control
linkage to governor.
4
3
5
6
7
0138 00-2
