TM 5-3800-205-23-1
UPPER PROP SHAFT REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Direct Support
Rag, wiping (Item 31, WP 0171 00)
Tools and Special Tools
References
Tool kit, general mechanic's (Item 33, WP 0172
Equipment Condition
Shop equipment, field maintenance (Item 23, WP
Transmission/transfer assembly removed (WP
Materials/Parts
Rear guard removed (WP 0100 00)
Grease, GAA (Item 16, WP 0171 00)
REMOVAL
Remove eight nuts (2), washers (3), bolts (4) and drive
1
shaft slip joint (1) from machine.
INSTALLATION
1.
Install drive shaft slip joint (1) on machine with eight
bolts (4), washers (3), and nuts (2). Tighten nuts to 40
lb-ft (55 Nm).
2.
Apply GAA grease to upper prop shaft grease fitting
3.
Install transmission/transfer assembly (WP 0147
4.
Install rear guard (WP 0100 00).
2,3,4
END OF WORK PACKAGE
