TM 5-3800-205-23-1
DIFFERENTIAL AND BEVEL GEAR REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172
O-ring
Personnel Required
Shop equipment, field automotive (Item 23, WP
Two
References
Pump, hydraulic ram, hand driven (Item 21, WP
Equipment Condition
Pin, guide, threaded, 3/4 in. x 12 in. long (4)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.