TM 5-3800-205-23-1
HYDRAULIC TANK REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
References
Direct Support
TM 5-3800-205-10-1
TM 5-3800-205-10-2
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172
Personnel Required
Bracket, link (Item 5, WP 0172 00)
Two
Materials/Parts
Equipment Condition
Cap set, protective (Item 5, WP 0171 00)
Engine access door removed (WP 0099 00)
Oil, lubricating (Item 24 or 29, WP 0171 00)
Hydraulic tank drained (WP 0010 00)
Rag, wiping (Item 21, WP 0171 00)
Air cleaner removed (WP 0018 00)
Tag, marker (Item 39, WP 0171 00)
Right fender removed (WP 0101 00)
O-ring (2)
WARNING
Do NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing serious injury.
At operating temperature hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulics. Failure to do so could result in injury.
CAUTION
Cap all hoses and tubes to prevent fluid loss and contamination of the oil system.
NOTE
Ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and
repair of the machine. Be prepared to collect fluid with suitable containers before opening any compart-
ment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all hoses and tubes to aid in installation.
