TM 5-3800-205-23-2
CHECK VALVE AND LIFT CYLINDER REPLACEMENT - CONTINUED
0021 00
LIFT CYLINDER REMOVAL - CONTINUED
30
17
31
32
34
33
LIFT CYLINDER INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Lift cylinder weighs 128 lb (58 kg).
Clean and inspect all parts prior to installation.
1.
Attach nylon sling to lift cylinder (17) and to a suitable lifting device. Take up slack in sling.
2.
Position rod end of lift cylinder (17) to machine at lift cylinder support bracket (31).
NOTE
Clean and lubricate rod end of lift cylinder and pin with antiseize compound before pin is installed.
Install pin with narrow ear of pin positioned downward and between bolt mounting points.
3.
Install pin (30) through lift cylinder support bracket (31) and lift cylinder (17).
4.
Install retainer bar (34), two washers (33), and bolts (32). Tighten bolts.
0021 00-9
