TM 5-3800-205-23-2
CHECK VALVE AND LIFT CYLINDER REPLACEMENT - CONTINUED
0021 00
LIFT CYLINDER INSTALLATION - CONTINUED
5.
Lower lift cylinder (17) onto suitable cribbing.
6.
Move attached nylon sling to head end of lift cylinder (17).
NOTE
Clean and lubricate head end of lift cylinder and pin with antiseize compound before pin is installed.
Install pin with narrow ear of pin positioned upward and between bolt mounting points
7.
With assistance, raise lift cylinder (17) into position and install pin (28) through head end of lift cylinder and draft frame
(29).
8.
Install retainer bar (27), two washers (26), and bolts (25). Tighten bolts.
9.
Remove nylon sling and lifting device from lift cylinder (17).
28
26
27
25
29
17
10.
Install elbow fitting (23) to lift cylinder (17) and tighten nut (24).
NOTE
Lubricate new O-rings with oil prior to installation.
11.
Install new O-ring (22), connect hose (20) to elbow fitting (23) and tighten nut (21).
0021 00-10
