TM 5-3805-248-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0012 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
SCRAPER SYSTEM - CONTINUED
1.
Check ejector area for any buildup of
Clean any debris from ejector area. If
6.
Travel Time of Ejector Is
debris.
problem still exists, go to test step 2.
Slow.
2.
Check hydraulic oil level.
If hydraulic oil level is low, fill to correct
go to test step 3.
3.
Check control linkage for damage or
Clean any debris from linkage. If any
debris that would restrict freedom of
damage is found, notify Unit Maintenance.
movement, and/or automatic return to
hold position.
STEERING
WARNING
Hitch and steering movement can reduce clearances suddenly and cause personal injury. Always stop
engine before working in area of hitch link.
Check hydraulic oil level.
If oil level is low, fill to correct level (WP
1.
Machine Steering Slow or
Intermittent to Respond.
Maintenance.
1.
Check steering system for oil leaks.
If any oil leaks are found, notify Unit
2.
Machine Turns Correctly
Maintenance. If no leaks are found, go to
During Normal Driving
test step 2.
Conditions, but Turns
Slowly with a Load.
2.
Check hydraulic oil level.
If hydraulic oil level is low, fill to correct
notify Unit Maintenance.
Check hydraulic oil level.
If oil level is low, fill to correct level (WP
3.
Machine Turns Slowly in
Both Directions.
Maintenance.
1.
Check oil leaks at steering cylinders.
If any oil leaks are found, notify Unit
4.
Machine Turns Slowly in
Maintenance.
One Direction.
2.
Check hydraulic oil level.
If hydraulic oil level is low, fill to correct
notify Unit Maintenance.
1.
Check tires for proper pressure.
Inflate tires to proper pressure (WP 0014
5.
Machine Slowly Drifts
00). If problem still exists, go to test step 2.
(Either Direction),
Wanders or Pulls to One
2.
Possible linkage or hydraulic
Notify Unit Maintenance.
Side on Level Pavement,
component malfunction.
Even When Steering
Wheel Is in Straight
Position.