TM 5-3805-248-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0012 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STEERING - CONTINUED
1.
Check hydraulic oil level.
If oil level is low, fill to correct level (WP
6.
Steering Is Erratic.
0014 00). If oil level is okay, go to test step
2.
If air bubbles are observed in hydraulic oil,
2.
Check for air bubbles in hydraulic oil
in reservoir.
notify Unit Maintenance.
1.
Oil is too cold.
If problem still exists after normal
7.
Turning Steering Wheel Is
operating temperature is reached, go to test
Difficult.
step 2.
2.
Check hydraulic oil level.
If oil level is low, fill to correct level (WP
0014 00). If oil level is okay, notify Unit
Maintenance.
TRANSMISSION
1.
Shut down engine.
If problem still exists, notify Unit
1.
Machine Moves When
Maintenance.
Shift Lever Is in Neutral
(N).
2.
Move shift lever through entire range.
Check transmission oil level.
If transmission oil is low, fill to correct
2.
Slow or Erratic
level (WP 0014 00). If problem still exists,
Transmission
notify Unit Maintenance.
Engagement.
1.
Observe torque converter oil
If temperature is in red, go to test step 2.
3.
Torque Converter/
temperature gage for an indication in
Retarder Oil Temperature
red.
Gage Is Registering in Red
(Indicates Overheating
During Normal
Operation).
2.
Ensure proper transmission range is
Select proper transmission range. If proper
selected for machine operation.
range was used, go to test step 3.
3.
Reduce load and continue to monitor
If problem still exists, go to test step 4.
temperature.