TM 5-3805-248-23-1
ETHER INJECTOR CYLINDER AND LINES REPLACEMENT - CONTINUED
0039 00
REMOVAL - CONTINUED
NOTE
Tag all lines and wire connectors prior to removal to ensure correct installation.
1.
Remove two bolts (16) and washers (17).
2.
Remove three bolts (19), six washers (18) and ether cover (15).
3.
Loosen clamp assembly (29) by rotating wing nut counterclockwise.
4.
Remove ether starting aid cylinder (26) from start valve assembly (25).
5.
Remove two bolts (27), washers (28) and cylinder clamp assembly (29).
6.
Remove nut (22), sleeve (21) and elbow (20) from tube assembly (13).
7.
Disconnect start valve (25) wire connectors.
8.
Remove two bolts (23), washers (24) and start valve (25).
56
4
7
83
4 5 67
23
9
10 9
10
11
11
12
9
1
29
34
5
26
6
25
28
7
24
27
23
22
21
11 10 9
13
20
19
18
14
17
WIRE
16
CONNECTOR
15
394-036
0039 00-2
