TM 5-3805-248-23-1
ETHER INJECTOR CYLINDER AND LINES REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Unit
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 113, WP 0338
Machine parked on level ground (TM 5-3805-248-
10)
Shop equipment, common no. 1 (Item 101, WP
Parking/emergency brake applied (TM 5-3805-248-
10)
Bowl lowered to ground (TM 5-3805-248-10)
Materials/Parts
Engine OFF (TM 5-3805-248-10)
Battery disconnect switch in OFF position (TM 5-
3805-248-10)
WARNING
Ether is extremely flammable and toxic. DO NOT smoke and make sure you are in a well-ventilated
area away from heat, open flames or sparks. Wear eye protection. Avoid contact with skin and eyes and
avoid breathing ether fumes. If fluid enters or fumes irritate the eyes, wash immediately with large
quantities of clean water for 15 minutes. Seek medical attention immediately if ether is inhaled or
causes eye irritation. Failure to follow this warning may cause injury or death.
Dispose of ether canister IAW local policy and ordinances.
REMOVAL
CAUTION
Wipe area clean around all connections to be opened during removal and disassembly. Cap lines and
plug openings after removing lines. Contamination of fuel system could result in premature failure.
Use two line wrenches to loosen ether lines. Failure to do so may result in damage to machine.