TM 5-3805-248-23-1
AMMETER REPLACEMENT - CONTINUED
0059 00
INSTALLATION
1.
Install new seal (5) on ammeter (4).
2.
Install ammeter (4) from inside operator compartment.
WARNING
Insulating washers must be between the inner nuts and bracket and also must be between the bracket and
both wire connectors. Failure to follow this warning may cause injury or damage to equipment.
3.
Install two washers (3) on ammeter (4).
4.
Install bracket (6) on posts of ammeter (4).
5.
Install two washers (3).
6.
Connect two wire connectors (2) at terminal posts.
7.
Install two nuts (1).
4,5 (HIDDEN)
1,2,3
6
394-201
8.
Install upper front access plates (WP 0192 00).
9.
Connect battery cables (WP 0104 00).
10.
Operate machine and verify gage operates correctly (TM 5-3805-248-10).
END OF WORK PACKAGE
0059 00-2
