TM 5-3805-248-23-1
LOW AIR PRESSURE WARNING ALARM SWITCH REPLACEMENT - CONTINUED
0095 00
REMOVAL
NOTE
Tag all wires before disconnecting to ensure correct installation.
1.
Remove two screws (1) and washers (2) from switch (4).
2.
Disconnect two wire connectors (3).
3.
Remove switch (4) from tee (5).
3
1,2
4
5
INSTALLATION
NOTE
Apply anti-seizing tape to threads of switch prior to installation to ensure proper sealing.
1.
Install switch (4) on tee (5).
2.
Connect two wire connectors (3).
3.
Install two washers (2) and screws (1).
4.
Install upper front access plates (WP 0192 00).
5.
Connect battery cables (WP 0104 00).
6.
Verify correct operation of warning alarm (TM 5-3805-248-10).
END OF WORK PACKAGE
0095 00-2
