TM 5-3805-248-23-1
CUTTING EDGE WORKLIGHT AND SUPPLEMENTAL STEERING PUMP SWITCH HARNESS
REPLACEMENT - CONTINUED
0122 00
REMOVAL
NOTE
Tag all wiring harnesses before disconnecting to ensure correct installation.
Note the location of all clamps and tie straps and the routing of harness to ensure correct installation.
1.
Remove two screws (6) and washers (7) from supplemental steering pump switch.
2.
Disconnect wire connector (1).
3.
Trace harness and remove all bolts (3) washers (4) and clips (5).
4.
Trace harness; cut and discard all tie straps (2).
5.
Remove cutting edge worklight and supplemental steering pump switch wiring harness (8) from machine.
2
1
3,4,5
6,7
3,4,5
394-128
8
0122 00-2
