TM 5-3805-248-23-1
FRONT TURN SIGNAL HARNESS REPLACEMENT - CONTINUED
0123 00
REMOVAL - CONTINUED
3.
Disconnect wire connector (5) located under main circuit breaker on left side of engine compartment.
4.
Remove turn signal wiring harness (6).
2,3,4
2,3,4
5 HIDDEN
2,3,4
6
INSTALLATION
1.
Position turn signal harness (6) on machine.
2.
Connect two wire connectors (1).
3.
Connect wire connector (5) located under main circuit breaker.
4.
Install nine clips (4), washers (3) and bolts (2).
5.
Install right side engine compartment access door (WP 0190 00).
6.
Connect battery cables (WP 0104 00).
7.
Verify correct operation of turn signals (TM 5-3805-248-10).
END OF WORK PACKAGE
0123 00-3/(-4 blank)
