TM 5-3805-248-23-1
CUTTING EDGE WORKLIGHT AND SUPPLEMENTAL STEERING PUMP SWITCH HARNESS
REPLACEMENT - CONTINUED
0122 00
INSTALLATION
1.
Install cutting edge worklight and supplemental steering pump switch wiring harness (8) on machine.
2.
Install all clips (5) washers (4) and bolts (3).
3.
Install new tie straps (2).
4.
Connect wire connector (1).
5.
Connect harness (8) and install two washers (7) and screws (6) on supplemental steering pump switch.
6.
Connect cutting edge worklight (WP 0086 00).
7.
Connect battery cables (WP 0104 00).
8.
Verify correct operation of worklights (TM 5-3805-248-10).
END OF WORK PACKAGE
0122 00-3/(-4 blank)
