TM 5-3805-248-23-1
MECHANICAL LINKAGE REPLACEMENT - CONTINUED
0179 00
INSTALLATION - CONTINUED
5.
Position shaft (5) in opening of engine compartment wall.
6.
Connect shaft (5) to steering gear (WP 0176 00).
7.
If removed, install new bearing (13) in plate assembly (9).
8.
Install plate assembly (9) over shaft (5).
9.
Install two washers (11 and 12) and bolts (10) on plate assembly (9).
10.
Install key (6) and lever (4) on shaft (5).
11.
Install bolt (8) and nut (7) on lever (4).
12.
Install bolt (14) through rod assembly (1) and lever (4).
13.
Install washer (3) and nut (2) to lever (4).
3
5,6
2
4
1
7
8
9
10
11
12
394-450
13
14
14.
Adjust steering linkage (WP 0175 00).
15.
Install hood (WP 0189 00).
END OF WORK PACKAGE
0179 00-4
