TM 5-3805-248-23-1
FLOOR MAT AND CAB STEP REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts
Unit
Equipment Condition
Tools and Special Tools
Battery disconnect switch in OFF position (TM 5-
3805-248-10)
Tool kit, general mechanic's (Item 113, WP 0338
REMOVAL
1.
Remove three capscrews (1) and washers (2) from under operator compartment floor.
2.
Remove cab step (4) from operator compartment floor.
3.
Remove floor mat (3). Open cut in right side. Lift over accelerator pedal and brake actuator. Open cut in left side. Lift
cover over handle.
3
4
1,2
394-354
(HIDDEN)
INSTALLATION
1.
Install floor mat (3). Open cut in left side and lower over handle. Open cut in right side and lower over accelerator pedal
and brake actuator.
2.
Install cab step (4). Align three bosses on bottom of cab step (4) with three openings in floor mat (3) and frame.
3.
Install three washers (2) and cap screws (1) from under operator compartment floor.
4.
END OF WORK PACKAGE