TM 5-3805-248-23-2
LINKAGE ADJUSTMENT - CONTINUED
0283 00
ADJUSTMENT - CONTINUED
NOTE
Perform steps 13 and 14 only if inspection indicates four spools C are not in correct positions.
13.
Loosen each of four locknuts C as necessary and turn each of four spools C as necessary until its forward edge is flush
with face of selector valve body.
14.
While holding spool C to prevent it from turning, tighten each locknut C to 15 lb-ft (20 Nm).
SELECTOR
FORWARD
EDGE
CAM
SPOOL C
SPOOL C
DETENT
LOCKNUT C
LOCKNUT C
0283 00-5
