TM 5-3805-248-23-2
SHIFT POINT ADJUSTMENT - CONTINUED
0285 00
ADJUSTMENT - CONTINUED
3.
Remove two bolts (1) and washers (2) from transmission case.
4.
Install bracket and two bolts (1).
5.
Install handle through top of bracket.
6.
Adjust chain on yoke so length is just long enough to thread end of yoke on handle and install.
7.
Turn handle clockwise and observe if governor linkage is moving. If not, adjust length or chain.
CHAIN
YOKE
HANDLE
2
1
BRACKET
394-831
0285 00-3
