TM 5-3805-248-23-2
HYDRAULIC RETARDER MAINTENANCE - CONTINUED
0289 00
ASSEMBLY - CONTINUED
7.
Position gear (52) in the flywheel housing and align
splines in gear with splines in friction discs (19 and
21).
8.
Position alignment tool in gear (52) and flywheel
52
housing to center gear (52) and discs (19) and (21) in
22
flywheel housing.
9.
Install remaining 21 of 24 washers (13) and bolts (22)
13
in retainer (14). Torque 24 bolts (22) to 42 lb-ft (57
Nm).
14
19,21
10.
Remove alignment tool and gear (52).
FLYWHEEL
HOUSING
394-737
11.
Install new preformed packing (65), plug (64), new preformed packing (67) and plug (66) in housing (12).
12.
Install race (62) in housing (12) until seated on lip of
12
62
counterbore and lubricate with clean oil.
13.
Install dowel (63) in housing (12).
67
66
65
63
64
394-736
0289 00-12