TM 5-3805-248-23-2
HYDRAULIC RETARDER MAINTENANCE - CONTINUED
0289 00
ASSEMBLY - CONTINUED
29.
Install bearing (38) in gear (31).
36
30.
Install washer (37), gear (31) assembly, washer (39)
and new preformed packing (40) on shaft (36). Be sure
new preformed packing (40) is seated in groove on
shaft (36).
37
31,38
39
40
394-728
31.
Install gear (31) assembly in cover (28).
32.
Install retainer (32) and locknut (33) on shaft (36) and
31
hand tighten.
28
32
33
394-741
33.
Remove cover (28) assembly from soft-jawed vise and invert.
34.
Torque locknut (33) to 37 lb-ft (50 Nm).
33
44
43
35.
Install pin (44).
36.
Apply thread sealant to short threaded end of stud (43)
and install.
28
394-742
0289 00-16
