TM 5-3805-248-23-2
HYDRAULIC RETARDER MAINTENANCE - CONTINUED
0289 00
ASSEMBLY - CONTINUED
WARNING
Hot oil or metal parts can cause severe burns. Wear insulated gloves, long sleeves and eye protection when
working with heated parts.
37.
Use oil bath to heat race (34) to a maximum tempera-
ture of 275F (135C).
35
38.
Install race (34) on shaft (29) until contact with shoul-
34
der of shaft is made.
39.
Use clean lubricating oil to lubricate outer surface of
race (34).
40.
Use a soft-face hammer to install gear (35).
29
394-743
41.
Install shaft (29) assembly in cover (28) assembly. Be
sure gears (31 and 35) are aligned.
35
29
31
28
SEALING
SURFACE
394-744
0289 00-17
